You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5161 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, April 10th 2010, 1:43pm

by mrfixit

I have a couple of thoughts for you.

If the two valves are on a seperate programs check the start times. You only need one start time per program.

If the valves are coming on and off with other numbered valves you have a wiring problem. Or if you're on a master valve could be valve problems. Most likely a diaphragm.

If they're doing it randomly on their own dump the controller. You could try disconnecting the number 2 and 10 wire from the controller. If the valves still come on the problem's not the controller.

I suppose in a rare case if the solenoid or bleeder screw isn't snug the valve could come on and off by itself. Two at once though, doubtful.

Now that I've given too much info it occurs to me you problably have a loose wire. If the valves are shutting off randomly when they're supposed to be running that would be my guess.


Good luck!

Saturday, April 10th 2010, 10:35am

by krappaw (Guest)

bad valves

Valve keeps shuting on and off on 2 out 0f 10 valves. Changed valves on both still having same problem>