You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4355 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, June 26th 2012, 10:37pm

by Wet_Boots

If the sprinkler system uses too much water for the pump to supply it, you need to make changes to the system.

Tuesday, June 26th 2012, 6:51pm

by Speedsl

First of all, sorry, my iphone is in french, the spell check is in french.
Si here is the good post
i have sprinkler system connected to the well of m'y house. M'y hoses are 3/4 in. Every Time i start the sprinklers , the pump from my house kicks out. There is a bit of a Hill too. So when the spraying is done. It drains itself. Is it possible That the pump cannot keep up to the demand to fill the hoses? What can i do?

Monday, June 25th 2012, 10:47pm

by mrfixit

For starters you either need a new keyboard or you need to quit drinking.
Spell check Please..

Monday, June 25th 2012, 10:19pm

by Speedsl

New installation on a tell...problems

i have sprinter system connectes to the tell of m'y house. M'y godes are 3/4 in. Every Time i start the sprinklers , the puma from m'y house kicks out. There is a bit of a Hill too. So she the spraying is done. It drains itself. Is it possible That the pump cannot keep up to the demand to fill the hoses? Chat CAN i do?