Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 7282 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information

Username

Subject

Message

Settings

Convert URLs

Automatically converts internet addresses into links by adding [url] and [/url] around them.

Enable smileys in this message

Smiley code in your message such as :) is automatically displayed as image.

Enable BBCode in this message

You can use BBCode to format your message, if this option is enabled.

Security measure

Security code

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, June 15th 2004, 6:37pm

by radical

Rainbird 1800 series shrub heads, but I would put a booster pump on that line. 18 psi is pretty low. In order to get 15' spray you'll need at least 30 psi.

Go to the top of the page

Thursday, May 20th 2004, 2:17pm

by DesertSam

Sprinkler Heads

I have ditch water coming through a 2 inch line at about 18 psi. I would like to install sprinkler heads capable of covering 15 feet each with minimum filtering and mainenance. This system will be above ground so I don't need pop-up heads. Can anyone recommend sprinkler heads for the job?

Go to the top of the page