You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 6078 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, October 3rd 2007, 6:52am

by Wet_Boots

Controller is discontinued. Long gone. Buy another controller. Hunter makes an 'export version' of their SRC series. If you really believed you only needed another transformer, then know that most USA-market transformers have an output power of 20 VA (at about 24 volts) and are interchangeable.

Wednesday, October 3rd 2007, 4:48am

by tmshead

further to my question re the HR 6100 Controller, can someone please tell me what the required voltage/watt or amps required for the HR 6100 to operate. Does it just need normal 110 volt current, or something less? like a 12 volt current??

Alternatively can someone direct me to whoever makes/made the HR6100 so I can send my questions directly to the manufacturer??
thankinall in advance

Monday, October 1st 2007, 4:35am

by tmshead

hr 6100 controller

hi,
i recently purchased a house that has several hr 61 controlers. they have worked fantastically until recently. I live in south africa where we use 220v 50hz. the transformer on one of the hr 6100 died and I need to replace but the transformer doesn't indicate what the outgoing currrent must be. my question therefore is what are the electrical specs for the HR 6100 (ie required incoming current for the unit to work) Is it US 110 Volt of something less???. Thanking you in advance.