You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5395 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, July 19th 2009, 11:01am

by Wet_Boots

Double-clamping can't hurt.

Sunday, July 19th 2009, 12:02am

by murrsue

What's the proper clamping method for poly pipe fittings? Double clamp??

We use poly pipe around here because of winter freeze. I'm going to use those Murray clamps that use a crimping tool to tighten, (as opposed to the screw clamps you tighten with a srewdriver). Anyway, someone told me I should double clamp, ie. use 6 clamps on a tee, not three. Wise advice or overkill?