You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5109 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The first post

Sunday, May 2nd 2010, 12:11pm

by stephen (Guest)

ranbird will runs zone 3 instead of 4. 4 works if i manually open the valve

I have a rainbird Ec series with 6 zones. Last year i noticed that zone 3 would run twice. Once by itself and then again with zone 4. Now when zone 4 is running only zone 3 actually runs. I cannot get zone 4 to work at all with the controller. It works fine if I manually turn the valve. Zone 4 is properly wired. The fact that zone 3 runs instead makes me think it is the controller.