Reply
Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Attention: The last reply to this post was 5090 days ago. The thread may already be out of date. Please consider creating a new thread.
The last 7 posts
Found It, and actually found a local retailer that had them in stock
Well I found what I needed. I couldn't believe there was a retailer for these things. I am happy as a lark!!!
Click here to see
Rainbird's own valves used a 1-inch solenoid (32 threads per inch) ~ there used to be a Universal solenoid kit that would replace most any of the 3/4 or 1-inch solenoids
1" Threads
Well I tried the standard 811 3/4" replacement and it is a no go. I am attaching a photo of the solenoid that I need. I remember seeing an adapter kit to go from the 1" threads to 3/4, but can't find it anywhere. Anyone know where I can find it?
Thanks
I'll pull one out tonight and see if I can get some measurements on the thread size. I appreciate your response Wet Boots.
Rainbird used to buy valves from Hydro-Rain, and those valves would use a 'standard' 3/4-20 solenoid, which means you can probably use an Irritrol solenoid for a replacement.
Help with rain bird valve Identification
Hello,
Recently took over maintenance on a few apartment complex units. I have about 30 of these 2" valves but most of them have bad solenoids.
They are a 2" Globe style. I know they are discontinued from Rain bird, but is there any cross reference for the solenoids on these things?