Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4674 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information

Username

Subject

Message

Settings

Convert URLs

Automatically converts internet addresses into links by adding [url] and [/url] around them.

Enable smileys in this message

Smiley code in your message such as :) is automatically displayed as image.

Enable BBCode in this message

You can use BBCode to format your message, if this option is enabled.

Security measure

Security code

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, July 11th 2011, 12:36am

by Mitchgo

What kind of controller do you have? It's possible the controller is acting up as well.

Do you have a multimeter? Test for ohms and voltage at the controller

Go to the top of the page

Sunday, July 10th 2011, 11:21pm

by grizlee310

Zone 4 valve won't open after 3; won't close going to 5.

I replaced a valve for zone 4 (this after replacing it last year) due to the fact that once zone 3 was finished the valve for 3 would close, but 4 would not open without manually doing so. Once 4 is completed on the timer it does not close (must close manually), but zone 5 kicks on. I cleaned zone 4 valve completely before replacing, but was still ineffective. Ideas/solutions???

Go to the top of the page