Reply
Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Attention: The last reply to this post was 4674 days ago. The thread may already be out of date. Please consider creating a new thread.
The last 5 posts
that sounds like the best answer to me. That way I don't have to worry that I left a little water in there, plus I don't have to worry about the pipe from the ground up changing height as the ground freezes.
thanks
Take the RPV inside in the winter. (Install unions). Blow out the water.
For new homes in cold climates, the problem can be just the opposite. The soil that is backfilled along the foundation will settle, and make an install look way crooked.
As long as you blow out the system at the end of the season and drain it, you will be fine.
Winterize the RPZ also by opening the "drain valves" and leaving them open.
I assume like most sprinkler systems I see, you have a water shutoff from inside for the system.
Winterizing a sprinkler system
See what the experts say first..........
Pipe from House to ground
Hi,
I am in Massachusetts and have a question about the pipe that runs from the house to the manifold in the ground.
I have a 1" pipe that exists the house just above the foundation. It runs through an RPZ and then to the ground into a manifold. Now, I live in an area that freezes. Don't I have to worry about the ground freezing and heaving the manifold up and breaking the RPZ or pipe?
Is this something I need to worry about?