You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4662 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, August 2nd 2011, 9:39pm

by Mud Man

Thanks Mike -- much appreciated. Mudman

Tuesday, August 2nd 2011, 7:55pm

by mike1059

valves

Both the manual bleed and the solenoid should be closed. When the timer sends current to the valve the solenoid will open.

Tuesday, August 2nd 2011, 6:10pm

by Mud Man

How should I set the manual and selonoid valves to operate with timer?

I'm using Hunter PGV valves with an Orbit Timer. The Hunter valves have a manual control and a selonoid control. How should I set these to operate the valves with the timer? Should the manual valve be open and the selonoid valve be closed?