You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4647 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, August 7th 2011, 10:59am

by Central Irrigation

Sounds like when you replaced the controller, you got your wiring messed up.



There should be two wires that connect to your pump start/ Master Valve post in the controller. It also sounds like your common wire is not correctly connected to the common post.



Common wire is usually white in color.

Sunday, August 7th 2011, 8:01am

by april27

PLEASE HELP!!!!

?( :cursing: :cursing: My husband and I are tring to put in a new sprinkler system. The old system was a hunter and the new one is a rain bird. The rainbird won't turn on the pump so we tried to put the hunter system back in and it turns on the pump but the sprinklers won't work!!!! We are not able to find all the valves/cylonoids because they are under the ground and were covered up by sod. Also the system worked before we tried to change it out. But now won't woork at all please someone help me.