You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4274 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Monday, August 13th 2012, 7:32pm

by Wet_Boots

any Richdel valve used a standard solenoid denoted by the thread size "3/4 x 20" - that means 20 threads per inch

You might be looking at a manual-operation piece that is threaded on the old solenoid, if you see coarser threads.

Monday, August 13th 2012, 6:37pm

by Trev

RE: Richdel 216PR Solenoid Valve Parts

Quoted from "magicm1ke"


Further to post below.

I've just bought a replacement solenoid for my RICHDEL 216PR with a P/N R811-24VACG which I was assured would fit the 'old' Richdel valve.

On close inspection the thread on the new solenoid is finer than the original burnt out solenoid.

Does anyone have a source for a solenoid with the the original course thread??



Trev





"Guys,
I am looking for a replacement cover for a Richdel 216PR. Is is possible or too old? The threads for solenoid are stripped. Maybe a solenoid also. The Richdel is black and 10 screws hold cover on.

Thanks

Mike"

Tuesday, January 17th 2012, 8:17pm

by Wet_Boots

Stick with the modern replacement

Monday, January 16th 2012, 1:32am

by mrfixit

Here's a hydraulic 216. I don't know if the solenoid will go in there or not. Boots might know.

www.ebay.com/itm/NOS-Richdel-R-216HYD-1-1-2-Professional-Irrigation-Sprinkler-Valve-AWESOME-/320822743894?pt=LH_DefaultDomain_0&hash=item4ab2869356

Sunday, January 15th 2012, 5:40pm

by magicm1ke

Thx

Sunday, January 15th 2012, 3:02pm

by Wet_Boots

Valve bonnets are not commonly stocked as repair items. Here is your valve.

Sunday, January 15th 2012, 9:13am

by magicm1ke

Richdel 216PR Solenoid Valve Parts

Guys,
I am looking for a replacement cover for a Richdel 216PR. Is is possible or too old? The threads for solenoid are stripped. Maybe a solenoid also. The Richdel is black and 10 screws hold cover on.

Thanks

Mike