You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4443 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, March 12th 2012, 7:02am

by wsommariva

That's what I thought. Spend a buck on a coupling and no worries. Thank you.

Sunday, March 11th 2012, 11:32pm

by Mitchgo

Rounding it back out with some channel locks usually does the trick. Depends on how bad the kink is. Repairing it would be the better choice

Sunday, March 11th 2012, 1:30pm

by wsommariva

Kink in 1" PE

I put a kink in the first roll of PE I was installing. I cut it out and coupled the PE together. Had to do it right?