You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4350 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Monday, April 2nd 2012, 9:36am

by GatorGuy

Elevation on these things is critical.
Higher than all your spray heads?

Monday, April 2nd 2012, 9:00am

by Wet_Boots

I wonder if the zone runs uphill from the valve - wouldn't be the first time

Monday, April 2nd 2012, 12:13am

by Mitchgo

replace the whole valve.

Take the valve out and flush the line for 5-10 minutes

Sunday, April 1st 2012, 10:25pm

by Lsudad

Rain bird anti siphon leaks water after valve turned off

I'm at a loss. I have four anti siphon valves and three of the four work. The fourth I have replaced every part including replacing the entire valve unit. After turning off the valve water gushes out from the cap. It slows but continually leaks. When I take the cap off and siphon some water out, the water levels continues to rise. As stated I have replaced the diaphragm, the solenoid and the washer and cap. What else could it be? Thanks.