Reply
Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Attention: The last reply to this post was 4352 days ago. The thread may already be out of date. Please consider creating a new thread.
The last 5 posts
perform a reset according to mfr instructions
Hunter Pro-C Stations have dropped off my controller
This last week my Hunter Pro-C has lost 7 of my stations and do not identify station numbers above number 3. It's as though they don't exist... What can I do?
A rain detector could be preventing watering, or something may have cut the wires to the valves.
Hunter Pro-C none of the stations/zones work
My Hunter Pro-C sprinkler system stopped working. On noticing that my lawn was dry, I looked to see if the controller is powered on. It is ON; and set to the "Run" position. The LCD display on the controller seem to be working; it displays correct date and time. But sprinklers did not come ON even though today is a scheduled watering day.
I tried "Manual single station" for zone-1. The LCD display showed an icon saying zone-1 is ON; but none of the sprinklers came ON. Then I tried "manual single station" for the rest of the zones. None of the zones work.
1) What could be the cause of the problem? How do I go about troubleshooting this?
2) I don't know where the valves are located. Grass grown over and covered the lids. How do I find where the valves are located?
Kannan