Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4338 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information

Username

Subject

Message

Settings

Convert URLs

Automatically converts internet addresses into links by adding [url] and [/url] around them.

Enable smileys in this message

Smiley code in your message such as :) is automatically displayed as image.

Enable BBCode in this message

You can use BBCode to format your message, if this option is enabled.

Security measure

Security code

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, June 12th 2012, 8:36am

by GatorGuy

boots is right.
Except its FUS, not FU5
From the manual:
Display is stuck on a
zone and “FUS” is flashing
in the display.

1. Faulty valve solenoid.
2. Shorted wire connection.

Go to the top of the page

Monday, June 11th 2012, 7:53pm

by Wet_Boots

short circuit - probably a bad solenoid

Go to the top of the page

Monday, June 11th 2012, 5:40pm

by jrebcarlson

Richdel 500 PRI controller error

When a particular station is ready to turn on (7), the controller displays and blinks a FU 5 error. Do you know what that means? I am without a owners manual. Help?

Go to the top of the page