You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4333 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Saturday, June 16th 2012, 12:56am

by mrfixit

If that's your valve, do yourself a favor and buy the valve with the flow control. I'm sure Boots will agree.
Click on this

Friday, June 15th 2012, 11:14pm

by Wet_Boots

your valve is still available

Friday, June 15th 2012, 6:05pm

by melco58

updating an old Nelson system

I have an old Nelson system (probably from the late 1980s or early 90s that I am systematically updating piece by piece. The controller valve seems to be shot for a couple of my sections and I cannot find any Nelson parts to match it. I have seen the Hunter SRV-101 that looks just like my valves. Anyone know if the Hunter will work on this system? Would love to find a part so that I don't have to change out the whole thing. Thanks!