You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4308 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, July 10th 2012, 8:08am

by GatorGuy

Thanks for the update.
You are now the official expert.

Tuesday, July 10th 2012, 4:52am

by Aphony

Yelled. Was advised to relax and connect. Connected. So far so good. All is working... Thanks.

Monday, July 9th 2012, 9:18am

by GatorGuy

I can't find anyone local who has done this.
Give Hunter a yell at 760-591-7383

Sunday, July 8th 2012, 5:24am

by Aphony

Connection of Solar-Sync and Roam RCS to Hunter Pro-C

I am a happy user of Pro-C equipped with Solar-Sync sensor. Recently I bought Roam with SmartPort kit. I found out that SmartPort should be connected to REM terminal of Pro-C. However this terminal is already occupied by Solar-Sync wiring. In manuals I have not found nothing about possibility of parallel conection of different devices to this terminal. Does anybody have a secret knowledge on the topic? Just to avoid burning out the device...