You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4250 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Friday, September 7th 2012, 2:13pm

by mrfixit

Here you go, have fun.
Click on me

Friday, September 7th 2012, 1:19pm

by santafehomepro

i assume you mean the common ["the ground wire].
i didn't see any nicks in the wire. i crawled under the crawl space yesterday; there was no visible nicks or breaks in the wire. there are a few areas, under bushes, etc. that i have not checked. i will do that.

there is no spare wire, all 7 seven are used; 6 for 6 zones and a white for the common [neutral/ground wire].

i'm not entirely sure how to test the wiring. i've gathered with a multimeter.
i'm sure that question has been answered before, can you direct me?

thank you!

Thursday, September 6th 2012, 9:41pm

by mrfixit

The ground wire's probably bad.
Possibly all the wires were cut somehow.
Do any digging recently?
Is there a spare wire at the valves you could use for a new ground wire?
Test the wiring to see if it's bad.

Thursday, September 6th 2012, 1:59pm

by santafehomepro

half my zones will not turn on

front lawn:
program A
zones 1, 2, 3
these work fine.


back yard:
prgram B
zones 4, 5, 6
these do not turn on at all.
i can manually turn the zones on, but they do not turn on with the control box.
i checked the wiring (traced it visually, no nicks or exposed wires) and it seems to be ok.
what next?