You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4137 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Saturday, December 29th 2012, 5:27pm

by Wet_Boots

Maybe see how it goes with the kit, and if it all clogs up, buy another drip kit, along with a filter. Or get the filter now, and save yourself grief down the line.

Friday, December 28th 2012, 3:46pm

by Philbytx

Our city water is pretty well filtered :) !

Should I install a filter ahead of this kit?
I have no documentation as the system was installed back in 1999 (way before we bought the house) and the firm that did it is out of business :( !

Thursday, December 27th 2012, 4:51pm

by Wet_Boots

I'm not sure what filtration that kit has, if any. Your city water is supposedly filtered and then some, but it is still customary for pros to have fine-mesh drip filtration plumbed into the sprinkler system before any of the sprinkler water gets to the drip components.

Thursday, December 27th 2012, 9:11am

by Philbytx

I'm looking to install an Antelco A81305 1/2 in. Sprinkler Riser To Drip Irrigation Conversion Kit. I have around 12 bushes and 150 sq ft

Wednesday, December 26th 2012, 10:10pm

by Wet_Boots

What drip kit? Make and model, please. As for pipe sizes, no big deal.

Wednesday, December 26th 2012, 1:32pm

by Philbytx

Replacing 3/4" Hunter PGP head with 1/2" Drip line kit on 3/4" pipe.

I am endeavouring to replace a blanked off PGP pipe end with a drip line kit. Can't find a kit in 3/4" and I am not sure if I can simply use a 3/4 to 1/2 reducer and install the kit on that. Can I do so without any issues?
Many thanks

Phil