You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4098 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Wednesday, February 6th 2013, 7:57am

by Wet_Boots

If your tubing is of a standard size, then it will work with the barb elbows used with Netafim drip tubing.

If you maintain your own drip, you want extra tubings and fittings on hand.

Tuesday, February 5th 2013, 11:12am

by Ed mtz (Guest)

Thank you

Tuesday, January 29th 2013, 8:07pm

by Wet_Boots

Drip fittings are cheap. Just buy more.

Tuesday, January 29th 2013, 1:57pm

by Ed mtz (Guest)

remove tubing from rain bird easy fit elbow

I had to move some distribution tubing and relocate a rain bird easy fit compression elbow, but couldn't remove the tubing and had to cut it. Any advice on how to remove some tubing left in the elbow to be able to reuse it?