You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 8030 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, May 14th 2002, 3:24am

by SprinklerGuy

Is it gushing out of the top? Is it weeping out of the top? is it a new breaker? Was it currently winter there? Was it winterized? Is there a zone on when you try to turn on the breaker? Are you turning it on all the way, or cracking the valve partway? More info please?

Sprinkler Solutions, Inc.
Arizona and Colorado
www.sprinklersolutions.net

Monday, May 13th 2002, 3:44am

by RVLI

<BLOCKQUOTE id=quote><font size=1 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>
I have a Febco vaccuum pressure breaker. When I try to run water through it always leaks out of the top. Is this because I don't have it level? It's not that far off. I have checked the parts inside and everything seems to be OK.
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=2 id=quote>
What's your pressure? If it's high do you have a Pressure Reducing PVB? If not you may need a new bonnet and or poppet set.

Sunday, May 12th 2002, 6:24pm

by steve

Backflow preventer

I have a Febco vaccuum pressure breaker. When I try to run water through it always leaks out of the top. Is this because I don't have it level? It's not that far off. I have checked the parts inside and everything seems to be OK.