You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 7655 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Saturday, May 17th 2003, 2:44pm

by Rays Sprinklers

You have to buy and install the actual nozzles, the ones on the head are just for flushing during installation

Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers

Sunday, August 18th 2002, 7:37pm

by RVLI

You still have the PopTop caps on the heads. These are just for installation, then you put in your nozzles. There is a little handle that you pull up the riser with, grab the riser, twist the PopTop off, and put in your nozzle that suits your needs.

Sunday, August 18th 2002, 9:54am

by nestors

Yes there is dirt in the screen or nozzle itself ,remove and wash out dirt and reinstall .

Nestor's Ga. 770/410-9356

vincent nestor

Sunday, August 11th 2002, 11:46am

by wilmar p.

nozzles

i am installing my rainbidr sprinkler system and i tried the sprays and all that comes out fo the orance nozzles is a stream of water. are something rong with these nozzles?