You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 7655 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Monday, May 12th 2003, 10:16am

by Rays Sprinklers

I do not use impacts but i do have a wide range of knowledge about them.
The head is broken, your spring which releases the arm, you have to install a new
head or better yet convert to gear driven without diging.

Buy Hunter ATR impact replacements which slip into the impact canister

Ray
Rays Above and Beyond Automatic LAwn Sprinklers

Raymond Padula Jr.

Monday, May 12th 2003, 10:14am

by Rays Sprinklers

I do not use impacts but i do have a wide range of knowledge about them.
The head is broken, your spring which releases the arm, you have to install a new
head or better yet convert to gear driven without diging.

Buy Hunter ATR impact replacements which slip into the impact canister

Ray
Rays Above and Beyond Automatic LAwn Sprinklers

Raymond Padula Jr.

Monday, June 24th 2002, 12:31pm

by RVLI

I have no expirience with impacts, but what I would do is just replace the whole head.

Friday, May 31st 2002, 6:10am

by PaulHe

Sprinkler Head Problem

I have a Raintree Rotor Spinkler Head, mode 2045a that will not move.
The arm that should bounce off the spray is not doing so. I checked the head and it appears that there is still a spring attached but the arm just lays against the spray of water.

Any idea of what is wrong or the adjustment I need to make?