You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3551 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, June 10th 2014, 3:29pm

by Wet_Boots

Give it a try. Worst that can happen is it doesn't work.

Tuesday, June 10th 2014, 1:47pm

by mikemac

will side outlet on popup source water if bottom inlet is connected to the water source?

I have a backyard strip and my landscaper installed popup spray nozzles. As the shrubs have grown their branches block the spray from reaching all of the strip. What I'd like to do is add some bubblers near the areas that need more water. The popups have both a bottom inlet and a side inlet, and are connected to the piping at the bottom.

I was wondering whether I could connect a bubbler to the side inlet of the popup and get water to it that way? It would be easier than digging down to get to the pipe itself.