Reply
Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Attention: The last reply to this post was 3585 days ago. The thread may already be out of date. Please consider creating a new thread.
The last 5 posts
Mod1
I rebooted and it fixed the Mod 1 and Mod 2 problem. Took less than two minutes.
Rainbird zones 5,6,7
I just wanted to reply to this posting to add that I also have the same Rainbird controller and have seemed to run across this issue. The strange thing is I have 9 zones and yet the exact same zones have came up as No MOD 1. There must be some kind of defect where only zones 5,6, and 7 are affected and go out.
If the original poster happens to come back to read this, please list what you have done to correct the issue so myself, and others can go about doing the same being that it seems it may be an issue others may/will experience.
Thanks for the posting this.
Unplug controller. Unlock and remove all modules. Wait a minute or so. Re-install modules and lock into place. Plug in controller. If you still have same problem, then you need to replace just the MOD 1.
Rainbird ESP message No Mod 1 and zones have stopped operating
this is my first post. New member. I own a Rainbird ESP controller with 7 zones installed. 1-4 are operating fine. 5,6,7 are installed, but not operating now, and the controller is now displaying "no mod 1" when dial is in set in positions 5,6,7. I have double-checked that the module hs the lever in the "locked" position. What is the next logical trouble-shooting step to getting zones 5,6,7 operating again? MT