You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3546 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, August 12th 2014, 2:30pm

by irrigirl (Guest)

Valve Issue

How old is the valve?**

Tuesday, August 12th 2014, 2:29pm

by irrigirl (Guest)

Valve Issue

Did you take the solenoids off of the valve and switch them or did you switch the wires around at the circuit box?

How is the valve? Do you have a flow control on it, and can you open the said valve by hand with the manual bleed?

Monday, August 11th 2014, 10:27am

by semiremi

Issue with a zone

Hi

First time for me on this forum.
I have an issue with a zone - and after all troubleshooting i'm still not quite sure what is wrong.

I have a triple zone valve.
Zone one - doesn't come on anymore.

I thought at first it was a bad selenoid - so i switched zone one and two selenoids -
I turned on zone two (which now had the potentially bad solenoid) - and the sprinklers came one.
I turned on zone one (which now had the good solenoid) - and it failed to come one.
I checked the connection at the box - all wires seem correct, nothing loose.

I blew zone one with my compressor (winterize) it - then i turned it one and it worked - Success.. but
the next day - on its schedule - it failed come on again

Any idea what could be causing this?

Thanks anyone for any help with this problem

Remi