You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3483 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, October 28th 2014, 11:38am

by Wet_Boots

You might be dealing with voltages high enough to kill you. You need to think long and hard whether this is a do-it-yourself project.

Tuesday, October 28th 2014, 7:50am

by tuffturf

Pump start relay clicks but the pump is not engaging

Hi,
I'm new at troubleshooting and I have a problem with a pump start relay. The relay clicks when prompted from the controller, but the pump does not engage. Any suggestions as to where I need to start looking?