You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 7374 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Monday, March 1st 2004, 3:44am

by skamp

Great. I orginally designed with halfs and quarters so I will just leave it like that. I am sure I will be hitting you guys up with more questions. Thanks!!

Steve

Sunday, February 29th 2004, 8:21am

by Rays Sprinklers

I agree with Tom the center strips are designed for a Maximum of 4' if that. Iw ould use halfs along the sides and quarters at the ends. If it is 8' wide id use 8' or 10' nozzles.

Sunday, February 29th 2004, 5:06am

by Tom

Too wide for strip nozzles.

I'd use quarter and half nozzles.

Saturday, February 28th 2004, 6:27pm

by HooKooDooKu

I think you want to include end strip sprayers in combination with center strip sprayers so that you can get that "head-to-head" coverage. The idea behind "head-to-head" is that you get each spot on the yard to be watered by two heads (to make up for the fact that the spray will not throw evenly). If you only use center strip heads, that means the ends of the strip are getting hit by only one head.

Saturday, February 28th 2004, 11:22am

by skamp

Center strip question

I am finishing my sprinkler design and have a question. I have a 8'x36' side yard. I am not sure if I should just use regular 7' (I should get ~8ft at 35PSI) sprayers or a combination of center and end strip sprayers. Thanks in advance for the help!

Steve