You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 7359 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Thursday, March 4th 2004, 12:33pm

by RVLI

Toro doesn't make backflow devices anymore, and I have heard of quite frequent problems with them. My suggestion would just to be to replace it, as I doubt Toro makes parts for them anymore? I may be wrong.

Wednesday, March 3rd 2004, 7:49am

by JAW

****o?? Is this thing on?

Tuesday, February 24th 2004, 7:37pm

by JAW

Thanks!

I found the manual with the break-out diagram. Im going to take it appart and hope its just got dirt in it or something easy since I dont have replacment parts. Do you (or anyone) know where I can buy a replacement, or parts?

Tuesday, February 24th 2004, 3:29pm

by mrwettech

There are a few possible causes to your problem. Most of them have to do with the internal components like the check assembly, o-ring, and spring. You will need to disassemble to check them though. Most Toro sites should provide you with this procedure. Look under "product manuals". Hope this helps.

Tuesday, February 24th 2004, 7:31am

by JAW

Problem with Toro PVB 53300

Hi,

I just bought an existing home that has a Toro sprinkler system. The system works great, but when the system is off the PVB 53300 continues to leak water out the top. So, I have been turning the knobs to off while its not in use so the side of my house does not flood and my water bill does not get crazy. The problem is that I forget to turn it back on so the system fails to water on scheduled days.

Im wondering if there is something I can do to fix the valve, or does it just have to be replaced. And if it needs to be replaced can someone recommend somewhere where I can find it....so far I have been uanble to locate the valve at my local Home Depot or Lowe's...and cannot seem to locate it online.

Thanks in advance for your help!! [8D]