Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 7333 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information

Username

Subject

Message

Settings

Convert URLs

Automatically converts internet addresses into links by adding [url] and [/url] around them.

Enable smileys in this message

Smiley code in your message such as :) is automatically displayed as image.

Enable BBCode in this message

You can use BBCode to format your message, if this option is enabled.

Security measure

Security code

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, April 4th 2004, 4:15pm

by JV Sprinkler

How did the existing head come off if there are no threads? It sounds like you may have removed part of a stainless steel riser. You would have to dig a bit deeper to get to the actual fitting to tie into. Just a thought.

Go to the top of the page

Saturday, April 3rd 2004, 8:50am

by clpyper

Piping

I'm replacing heads and where one head should be there's a metal pipe with no threading on it. What is it and how do I replace the head?
Any help would be appreciated.
Chris

Go to the top of the page