You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 7226 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Wednesday, July 14th 2004, 5:27pm

by RVLI

It won't be a problem.........

Monday, July 12th 2004, 7:54pm

by OscarNav

Yes...i have the Rainbird 5000 PLUS rotor heads (the one with the on and off water feature, top green cover). I had to install SAM filters on the last 3 heads on my #1 zone, just wondering if i went ahead and put them in every single one of my heads would it be a problem....Thanks for your reply.

Sunday, July 11th 2004, 7:18am

by RVLI

The check valve shoundn't hurt anything, but what I would do is replace them all with 5000+'s

Friday, July 9th 2004, 9:57pm

by OscarNav

RB 5000 Plus and check valves.....?

Just wondering if anyone knows..

If i add the check valve filter screen to all the heads in my zones, Will this be a problem? I am running 5 heads per zone (5 Zones) and right now i only have them installed in the lowest head on the zone. It keeps pushing the water back, on one zone i had to install 3 to stop the water from pushing up from any head. Anybody have experience with this....?