You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 7122 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Wednesday, October 27th 2004, 4:38am

by Brian

how do you reprime the system

Wednesday, October 27th 2004, 3:52am

by aquamatic

Did you try to re prime the system

Tuesday, October 26th 2004, 7:01am

by Brian

thank you for your help.
first off none of the zones work at all. the system has worked it actually lost all pressure well running. as far as the supply it is connected after the tank the tank sits on top of the well pump. when it ran it ran totally fine now i just cant get any water to run in the system no even through the well hose spigget. anything else you need to know to help me with this please ask. thank you brian

Monday, October 18th 2004, 3:49pm

by BTanner

The first thing I would check is to see if there was a broken lateral (the part of the piping between the valve and the heads).[V] You can check that by trying other zones.
Give more info so that we can visualize your installation;
Has the system ever worked properly?
Where is the supply piping connected to the water system? Before or after the tank?
When and if it has ever operated properly, does the pump cycle on and off or are you using a pumpstart relay?
What do you have to do to get psi back after shutting down system?[8)]

Monday, October 18th 2004, 1:26pm

by Brian

loss of pressure

someone please help me. i am kinda new to this sprinkler system thing so please bare with me. i have a full system running off of well. as my system was running it suddenly shut lost all water pressure. even the hose spiggets off the system lost all water pressure. my pump runs fine i just am not getting any water to it. at first i was told the well dried out but thats not the case. i have also been told the the pressure tank could be broken and thats why i lost all presure. i just need some advice on what my next course of action should be. thank you for any suggestions.