You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 7141 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, October 31st 2004, 1:30pm

by nestors

Buy A Hunter Pro-C Controller and your life will be much easier.

Nestor's
Atlanta,Ga.

Tuesday, August 10th 2004, 6:08am

by SprinklerGuy

unplug the timer....disconnect the batter.....wait 15 minutes......hook up power...put new battery in.....should be fine.

Sometimes these timers need to be reset this way.

Good Luck!

Sunday, August 1st 2004, 8:04am

by wjmoore

Rain Dial controller problem

I have a Irritrol Rain Dial RD900-Int about 5 years old, and I noticed this morning that the display was blank. For some reason by particular model does not have a fuse, unless it is hidden somewhere - it's not on the wiring panel. I've checked the valve/solenoid wiring and can't find a problem there. The transformer is a bit warm but I don't think excessively so.

Any help troubleshooting the problem would be greatly appreciated.