You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 578 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, June 23rd 2019, 1:05pm

by mrfixit

Either a solenoid's bad or there are loose connections in the wiring. Does the program always stop at the same zone? If so, change the solenoid on that zone.
Redo all the splices at the valves or wherever you can find one.

Sunday, June 23rd 2019, 7:22am

by lpizzuco

System acting irradically!

After turning on my sprinkler system and programming it, I noticed it hadn't gone on at the scheduled time. I ran a manual schedule with no problems. Later played around with the controller (which was kind of old) and after some really strange issues (eg manual/scheduled programming would sometimes work and sometimes not), I decided to install an Orbit Model 91896 . Did the programming and still the same issues. So sometimes the manual programming works, scheduled programming starts midway through the program, manual programming starts midway etc...

Please help ! :S :S :S