You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Monday, August 9th 2021, 3:08am

by mrfixit

Here you go if you want to spend the money. I knew I had a customer with Superior 1 1/4" brass valves. Link

Saturday, August 7th 2021, 7:36pm

by mrfixit

Well I lied. I only found a half of a case of 1 1/2" Hunter PGV's.

You should try what Boots suggested.

Saturday, August 7th 2021, 12:07am

by Wet_Boots

It isn't important

Zone valves were always meant to be sized according to the flow of water traveling through them. That comes first. A common one-inch zone valve can pass enough water to fit into 1-1/2 inch plumbing.

Friday, August 6th 2021, 10:25pm

by mrfixit

I noticed myself that the 1 1/4" seem to have disappeared. I might have a case of them in my stock. I'll never use them. I'm very close to retiring. I'm too tired at the moment to go look. Will do tomorrow. I only commented so I wont forget. Cross your fingers.

Friday, August 6th 2021, 7:17am


Can't find 11/4 inline electric valves inorder to get job of updating system with wifi controller .

1 1/4 inline electric valveHi guys ,
I just got back into irrigation due to financial need O had a landscape buis . For nearly 20 years. It's been about 15 years since I shut down so a lot haschanged. I HAVE been coming up with specific project type ides to advertise recently my Idea was to advertise updating systems to wifi and Bluetooth enabled controllers but some customers need to update to electric valves first and this job im trying g to estimate right now I can not find 1 1/4 valves anywhere its really weird starting to think my only option is going to be to use reducer to go from 1 1/4 to 1 1/2 install 1 1/2 valve and back to 1 1/4 after the valve. Anybody have any secret suppliers or ideas or sugestions?