You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, October 22nd 2021, 3:39pm

by Sunshine❤️

I have the answer!

So I got a call from RainBird peep Angel. He explained that my ESP-Me model needed to run 2 separate programs at the same time. So on program B I proceeded to have stations that do grass @ 3 minutes 6x's a day. Program C was for my remaining stations to run 2x's per day. So Program B and C will run together. :). YAY! It works.

Friday, October 22nd 2021, 2:14pm

by Sunshine❤️

Programming stations not all to run every run time

Programming my rain bird system.

I need my grass to be watered 6 times a day for 2 weeks while the winter grass grows. I have 13 stations, 9 of them are grass and the others are drippers and trees. The drippers and trees only need to run 2 times per day. How do I program the system to not water all 6 times on 4 of the stations?

Thank you in advance for your help in pointing me to the right direction. I’m having a hard time finding this information.