You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 6872 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Sunday, June 26th 2005, 8:05am

by maxima2k6

have you tried turning the smaller screw counter clockwise to get pump to shut off?

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by scottn</i>
<br />I have a pressure switch that tells the pump when to come on and when to shut off. The type of switch I have is a 30-50 psi switch. Right now, I have the nuts that put pressure on the springs backed as far off as I can. When I put power to the pump, it comes on. It pumps at the pressures i mentioned. What I can't do it get it to shut off automatically. Do I need to turn the nuts down further? All I want is to have my system charge automatically when it drops below a certain psi so that it's constantly pressurized. Right now, I have to manually prime the pump and manually turn on the power to get the sprinkers to work. By the way, the sprinklers work extremely well with the bigger pump.
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

Monday, March 22nd 2004, 7:27am

by scottn

****ooooooooooo....................

Tuesday, March 16th 2004, 5:48am

by scottn

I have a pressure switch that tells the pump when to come on and when to shut off. The type of switch I have is a 30-50 psi switch. Right now, I have the nuts that put pressure on the springs backed as far off as I can. When I put power to the pump, it comes on. It pumps at the pressures i mentioned. What I can't do it get it to shut off automatically. Do I need to turn the nuts down further? All I want is to have my system charge automatically when it drops below a certain psi so that it's constantly pressurized. Right now, I have to manually prime the pump and manually turn on the power to get the sprinkers to work. By the way, the sprinklers work extremely well with the bigger pump.

Saturday, March 13th 2004, 4:23am

by drpete3

have set the pressure switch to kick off at the lowest pressure possible

I dont understand this statement. If you are telling the pump to turn off at the lowest possible pressure then it wont ever come on. For example if you tell the pump to turn off at 5 psi then it wont come on unless your system pressure falls below 5 psi. I just think that I am not understanding your post. can you please explain?

Friday, March 12th 2004, 5:50am

by scottn

Why can't I get enough pressure

see my previous post. Turns out that the pump was bad. It wasn't pulling enough to bring the water up from the well. I replaced the 1hp pump with a 1 1/2 hp pump. It primes fine. It pumps a ton of water when put on manually. I've got a pressure guage hooked up to it and it reads about 38 psi when the system is on but will only go to about 44 psi when it's off. It's a pressure system. I replaced the pressure tank and have set the pressure switch to kick off at the lowest pressure possible. Any ideas on why I cannot get the system to kick on and off automatically like it did before?