You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 7320 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, April 12th 2004, 10:42am

by LaserJock

I was able to get both valves working by taking them apart and cleaning them out. They had some dirt in them. I then swapped the parts from one to the other. Now everything works. I then found out that I had a break in the pipe (I think somebody drove over the sprinkler head). Oh well.

-LaserJock

Monday, April 5th 2004, 5:50pm

by LaserJock

1 zone works 1 doesn't

Hi!
I just bought a house and was trying to get the sprinkler system to work. I can turn on the main valve and 1 set of sprinklers turn on. However I can't get the the other ones to work. I found 2 valves but they have no electrical connection to a control box. I tried to manually turn on the other valve but nothing happens. I can hear water moving around in the valve but there is NO water getting to the sprinklers. Is this a valve problem or a sprinkler problem? Thanks.
-LaserJock