You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 7242 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Thursday, July 1st 2004, 8:32pm

by waketige25

Thanks it got it all done, and I am ready to test the system tomarrow. Thanks for all the advice.

Thursday, July 1st 2004, 9:24am

by HooKooDooKu

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">If the house shut off is after the meter, I wouldn't tap in there. You won't be able to shut the house water off while your tapping into the line, much less you'll have a wet mess, that you won't be able to shut off.<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

Not a problem if the meter itself has a shutoff.

Thursday, July 1st 2004, 8:19am

by RVLI

If the house shut off is after the meter, I wouldn't tap in there. You won't be able to shut the house water off while your tapping into the line, much less you'll have a wet mess, that you won't be able to shut off.

As far as connections go, a compression tee works for PEX.

Saturday, June 26th 2004, 2:40pm

by waketige25

Attaching pvc to pex

I have dug out down to my service line, and I am ready to put my tee on. My house is supplied by a 3/4 pex (aquapex??, milky-clear flexible pipe), and I would like to attach a 'T' into it and run 1" schedule 40 pvc piping to my system. How do you do that and what different connections do you need? I am going to cut in between the meter and the house shut off. I have asked my local hardware stores, and they did not know.

Thanks, Dylan