You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 6207 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Monday, May 14th 2007, 8:45pm

by lush96

i thought pcp was "angel dust". i think its pgp.

Friday, August 18th 2006, 2:32am

by jmduke7

You can pick up the tool at any local distributor that carries Hunter. If none are to be found in your area, try contacting Hunter directthrough their web site at www.hunterindustries.com, or better yet uou can click on the Sprinkler Warehouse banner at the top of the page and get htem there.

Thursday, August 17th 2006, 10:15pm

by Lucius Jackson

I have Hunter PCP sprinklers,where can I buy an adjusting tool.Thanks

Sunday, July 2nd 2006, 3:36pm

by xpedient

http://www.hunterindustries.com/support/Installation_Adjustment/Rotors/pgpinstruct.html

Saturday, July 1st 2006, 6:51am

by wrighcha

Hunter PCP Sprinkler Heads

I have a new sprinkler system with HUNTER PCP sprinkler heads. Can some one help me? There are three holes on top of the sprinkler head. Two of the holes take the allen wrench side of the tool and one takes the butterfly side of the tool. I have three questions. 1) How do you control how far right or left the sprinler turns? 2) How do you increase or decrease the turning radius? 3)How do you adjust the length of the water stream? PLEASE HELP