You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 6158 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Friday, June 15th 2007, 2:58am

by SprinklerGuy

1/2 will be fine....

Friday, June 15th 2007, 2:23am

by therealcallahan

Thanks for the info. It's only going to be spraying about 18FT.
-Jeff

Thursday, June 14th 2007, 2:44pm

by Wet_Boots

Just use regular funny pipe, unless you're using a very large nozzle im the head.

Thursday, June 14th 2007, 2:24pm

by therealcallahan

funny pipe

Is 3/4" funny pipe available-It seems like 1/2" is all I can find. I need to run off of a 1" lateral poly pipe about 8'. I am using a Hunter l-20 ADV rotor for this location. Thanks in advance for your help
-Jeff