You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 6149 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Wednesday, June 27th 2007, 3:00pm

by Fertigation Guru

The “white stringy slime” you are seeing is actually the secretion from a sulfur feeding bacterium. The sulfur in your fertilizer is providing sustenance for the bacterium which is producing the slime. Unfortunately sulfur is necessary in fertilizer to counteract the alkalinity of salts. However, I am not sure of the exact sulfur content in Fertigators fertilizers, but their has to be some. If you discontinued the use of the Fertigator for an extended period of time, the problem would disappear assuming there is no other sulfur source.

There are two treatments. The one you use depends on the water source for your irrigation system.

Well water- you have to treat the well itself because this is where the bacterium is originating. The bacterium has been in your well for quite some time, and the Fertigator just allowed it to become visible. The solution to the problem is chlorine. You can shock the system, very similar to a shock treatment of a pool. The chlorine will kill the bacteria and inhibit future growth. Sulfur feeding bacteria is very resistant to chlorine because of the thick layers of slime (white stringy stuff). The secretion is what protects the bacteria. A standard treatment may kill off the bacteria on the surface layers of the slime but will leave the inner layers unaffected and free to continue multiplying. I would strongly consider consulting a well specialist to perform the service for you. It may require multiple chlorine treatments before the problem is controlled.

City water- it is rare that city water will carry this bacterium due to the high levels of chlorine injected at the water treatment plant. However, if this is the case, it is more difficult to fix. You will need to introduce chlorine into your irrigation lines on a periodic basis. If the bacteria only exists in your irrigation lines it will eventually go away completely after multiple treatments. The hard part is introducing the chlorine into your irrigation line. Do not worry it can be done, but I can provide instructions if you need me to. My feeling is you are using a well...

Monday, June 25th 2007, 12:55pm

by gregory1420

its almost like some kind of slim or snot...

Monday, June 25th 2007, 2:34am

by jmduke7

Without being able to see what you are describing, my guess would be on the Fertigator.

Sunday, June 24th 2007, 5:45pm

by gregory1420

SPRAY CLOGGING

i have atleast one of my spray zones getting clogged with some kind of stuff i have never seen before its clogging my spray filters to the point they will not spray anymore and have to be cleaned out.i can wash them out or use air and blow them out and re-install them and they will get clogged again in a matter of days. pulled all of them and cleaned them and ran that zones for maybe 10min to get the lines cleaned and they still get clogged its like a white sringy stuff.i have never had this problem until after i installed a fergator.is that the problem?any ideas how to cure the problem.i have turn my fertigator off for serval weeks before this was a problem but now it is...i turned the fertigator off b/c of a fungice problem never had the problem until after i turned it off.do you think it left some kinda of film in the lines?