You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 6039 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Monday, October 15th 2007, 6:54am

by jimmyburg

I agree

Monday, October 15th 2007, 6:30am

by Wet_Boots

In theory, you could glue together sch 40 conduit for water pipe, since the dimensions match, and your backflow protection would make non-potable pipe a non-factor. I think I've heard of it being done, but don't blame anyone if it doesn't hold up. The 'approved' way to get grey pipe would be to use sch 80.

But underground PVC could also be SDR 21 or other, thinner-than-schedule-40, grades.

Monday, October 15th 2007, 6:27am

by Roger Stover

I understand a professional like yourself would not use electrical conduit for irrigation piping. And I understand it is not rated for water pressure. And I understand that standard white pvc is not rated for sun exposure. But I have standard white pvc which we have used in our nursery fully exposed to Southern California sun for 15 years with no problem. So I wonder how many, if any people have actually used uv-proof electrical conduit for exposed low pressure water lines from valves to drip lines with no problem.

Monday, October 15th 2007, 5:17am

by jimmyburg

conduit is not used for water, because it not rated for pressure, you can use it for drains, sleaves, and elect.. I use reg. pvc for wiring, but i spray paint the pipe. conduit in not rated for water pressure, it will not hold under pressure.

Monday, October 15th 2007, 5:01am

by Roger Stover

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by jimmyburg</i>
<br />are you talking about for sleaving?
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

no - using for piping from the valves leading to drip hoses

Monday, October 15th 2007, 3:32am

by jimmyburg

are you talking about for sleaving?

Sunday, October 14th 2007, 10:27pm

by Roger Stover

Use electrical conduit for irrigation

Is it possible to use electrical conduit for residential water irrigation systems? The electrical conduit has the advantage of being sun resistant and cheaper than the white pvc piping. Also it looks nicer than the white piping when exposed in a garden.

Code compliance is not an issue because the systems I install are built in a rural location and never inspected.