Reply
Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Attention: The last reply to this post was 6010 days ago. The thread may already be out of date. Please consider creating a new thread.
The last 10 posts
The no-testing doesn't really give someone in the trade a ton of confidence, especially if Double Check Valve Assemblies are used. Who knows what's going on inside those things? At least a properly-installed PVB puts gravity on your side.
you are correct! i have been a tester for over 10 years before i became a lic irrigator. i was testing under a cert. before it became a lic here in texas.
Well, to those of you who have no testing requirements you should feel lucky. If you don't have to test the assemblies just take out the guts and internal parts and the backflow will never spew water. But remember the whole point of backflow is to protect the drinking water not worry about cheap prices on backflow parts.
Even the 'indestructible' Rainbird PVB (old Watts model) would need a washer sooner or later.
There are really two diverging ways to look at backflow. One is the more rigorous pass/fail record when testing backflows, and the second is whether the device starts spewing water. In locales without any testing requirements, it's the "spews water" aspect that homeowners would worry about, since they aren't worried about testing.
if your talking about the RPZ and PVB then you are correct. I rarely have any trouble with the double checks.
Just so you all know febco is pure junk, you will have nothing but problems with these. I test backflow assemblies all the time and the fail rate is 70% of all febcos tested fail.
Figures don't lie. Liars figure.
Write that one down for a bumper sticker
WILKINS WILKINS WILKINS WILKINS
YOU BETTER BELIEVE IT!!
they still make the old rainbirds, i have a school district here that i have been replacing those.
Febco prices their repair parts pretty high. I've seen mailings from third-party vendors with their own bonnets and such for Febco. I like the Wilkins 720 PVB better than Febco. Not sure how many other brands still have brass bonnets, like the 720, and the older Watts (sold as Rainbird)