You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5834 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, May 7th 2008, 9:25pm

by mrfixit

Valve acting up

I don't know your symptoms but it appears you've checked everything so I'll run with the diaphragm. Sometimes a diaphragm will appear to be ok but the rubber is a tad stiff. It's not as flexible as it used to be. This can cause a valve to be slow to come on or slow to turn off. Possibly stick on or not come on at all. Or come on part way. If you'd just changed the diaphragm instead of the whole bonnet you might have fixed the problem.

Wednesday, May 7th 2008, 1:13pm

by cbrown

Irritrol 216B Valve problem.

Hi All

We have a 8 zone system that one of the valves has acted up in. We bought a new unit (Irritrol 216B)and replaced the top unit (bonnett?) in the field and the valve was good as new. We then took the valve to the electronics shop and disassembled the thing. Everything looked OK. The diaphram assembly did not appear to have any cracks or such damage under examanation with bright backlighting. The solenoid was checked with 24VAC and clicked in and out smoothly. The vent ports appeared to be clear. We are baffeled by this. It does not help that we can not make heads or tails about how this thing is supposed to work. And this is very aggravating as we work with pneumatic and hydraulic systems fairly regularly. If someone could direct us to a explanation of how these valves work, it would be greatly appreciated. As I have just inherated this system due to company operations. And I am not a irrigation technician. I really appreciate any help you can give.

Curtis