You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5069 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, June 10th 2010, 2:44pm

by DenverDan

probe and toner kit

Does anyone know a good entry level unit for tracing sprinkler wire from the timer to the valve box,



thanks

Thursday, May 27th 2010, 1:48pm

by Wet_Boots

There are already wire nuts with dielectric grease built in, and there are other waterproofing methods. Do not make underground splices.

Thursday, May 27th 2010, 12:22pm

by murrsue

Proper wiring of new system

Planning out my system and I assume that full runs of wires are smarter than making connections underground and all connections should be in the valve boxes. What's the best way to do the wire connections? Do the connections need to be waterproofed somehow? I was thinking of coating the connections with dielectric grease or maybe silicone caulk inside the wire nuts. Is this okay or is there a better method?