You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4751 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The first post

Saturday, April 30th 2011, 2:45pm

by JIm Sourini (Guest)

Test Valves

When I turn to test all valves on the ESP modular for the 2 minute test. Once they start the manual says to turn to the

auto position. I have 8 zones and it goes through all 8 zones with the test. However it does not shut off and goes back to

zone 1 and starts all over again and does not shut off. What is the problem.