You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4127 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, June 17th 2011, 9:47pm

by Mitchgo

What's the model of the rain bird controller?
Most of the time it's user error.. but older controllers can have it's issues

How many zones do you have?

Be sure to check your programming again, read through your manual too.

Create a dummy program and set the zones to run for 1 min and see if it cycles through everything

Friday, June 17th 2011, 6:31pm

by Medhog (Guest)

Sprinkler system Program question

i have a rainbird system that was installed before I moved into this house about a month ago. I have adjusted all the heads like I want them and I have run the test of each valve through the controller. Each valve seems to be working fine and I can turn on each one separately without problem. However, I have the system programmed to come on every other evening but when the time comes only the first valve comes on. I have tried other settings but I can't figure what I have wrong. Any thoughts?