You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4309 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Thursday, August 2nd 2012, 2:16pm

by Wet_Boots

the manual is fairly clear - there is a point where you have to get another human being in front of the controller

can you get any watering to happen at all?

Thursday, August 2nd 2012, 10:47am

by fmayerjr

Hunter Pro-C programmign for different zones on odd and even days

I have a hunter Pro-C controller and 11 zones. I am trying to program the controller to do the following:

Zones 1,2,3,4,5,10,11 to be watered on even days

Zones 6,7,8,9 to be watered on odd days

I have programmed program A to water on even days and Programmed program B for odd days, but the sprinkler system does not come on either of the days.

Can someone walk me through the steps to program this controller to do the above as the manual is usless.

Thank you -